Home Page  ꄲ  ECTFE Fluoropolymer Film

ECTFE Fluoropolymer Film

Product Center

넳 넲

Product Feature:

 

Heat Resistance

  ·  Continuous service temperature : -200 to 150℃（-328to 300℉）

  ·  Melting range:240℃（464℉）

  ·  Heat sealable

 

Chemical Resistance:

  ·  ECTFE film is stable to almost all chemicals and solvents. It also has low permeability to liquids, gases, moisture, and organic vapors.

  ·   It also has low permeability to liquids, gases, moisture, and organic vapors.

 

Flame Resistance

   ·  ECTFE films is flame retardant material with limited oxygen index (LOI) >52%.

   ·  Film auto-ignition temperature>650℃

 

Weatherability

   ·  ECTFE film can withstand long-term outdoor exposure without changing its performance.

   ·  High transmittance of ultraviolet and all, but far, infrared.

 

Mechanical Toughness

   ·  Superior anti-stick and low frictional properties, Hydrophobic, oleophobic.

   ·  High resistance to impact and tearing.

 

Electrical properties

   ·  High dielectric strength, over 30 kV/mm for1mm film.

   ·  No electric tracking, non-wettable, and non-charring

 · Very low dielectric constant, dissipation factor, and stable temperature change among solid insulating materials.

 

Table 1: Typical Properties of QMT ECTFE Fluoropolymer Film

Items

Unit

Value

Gauge

μm

12.5-500

Width

mm

50-1600

Density

 

2.12-2.17

Melt Point

℃

240

Continuous Service Temperature

℃

150

Tensile Strength(MD/TD)

Mpa

>20

Elongation at break (MD/TD)

%

>200

* The above values are indicative and not guaranteed.

  • ETFE Fluoropolymer FILM

    ETFE film is a transparent, thermoplastic film that can be heat sealed, thermoformed, vacuum formed, heat bonded, welded, metalized, laminated(combined with dozens of other materials), and used as an excellent hot melt adhesive. This wide variety of fabrication possibilities combines with the following important properties to offer unique balance of capabilities not available in other plastic films.

    넶4 ¥ 0.00

  • FEP Fluoropolymer FILM

    Offering excellent heat resistance, non-stick and electrical performance
    Applications:
    Electronic industry release film, welding film, carbon fiber molding isolation film, acoustic film, cable wrapping.

    넶17 ¥ 0.00

  • PFA Fluoropolymer FILM

    PFA film is a transparent, thermoplastic film that can be heat sealed, thermoformed, vacuum formed, heat bonded, welded, metalized, laminated (combined with dozens of other materials), and used as an excellent hot-melt adhesive. This wide variety of fabrication possibilities combines with the following important properties to offer a unique balance of capabilities not available in any other plastic film.

    넶4 ¥ 0.00

  • ECTFE Fluoropolymer Film

    ECTFE film is made of ECTEF resin as raw material through melt extrusion. Its surface is smooth and the product has excellent performance in all aspects. Because of its outstanding tear resistance and water vapor barrier properties, it is very suitable for use in photovoltaic front panel coating and constrictions field.

    넶5 ¥ 0.00

  • PCTFE Fluoropolymer Film

    PCTFE film is a transparent, thermoplastic film that can be heat sealed, thermoformed, vacuum formed, heat bonded, welded, metalized, laminated (combined with dozens of other materials), and used as an excellent hot-melt adhesive. This wide variety of fabrication possibilities combines with the following important properties to offer a unique balance of capabilities not available in any other plastic film.

    넶4 ¥ 0.00

  • tailor made product

    The company can process the surface treatment of ETFE, FEP, PFA, ECTFE, and PCTFE films according to customer needs to improve the bonding performance of the film with other materials.

    넶3 ¥ 0.00